四、主要的软件安装 前面说过，我的习惯是，装系统的时候就安装一个内核和编译系统，得到了一个干净的系统后，再安装其他的软件就比较清晰。另一点，除非搞不到源代码版本，一般情况下我都会下载官方版本的源代码文件，来重新编译之。同样的，选择软件版本要根据该软件的Release Note来决定，并非越新越好。这就是为什么很多软件都是几个版本齐头并进的发展之原因。这些软件不同版本之间的安装方法会有少许不同，安装前一定要仔细阅读目录中的README文件和INSTALL文件，否则这些少许不同会造成不少得麻烦。下面描述的安装过程都核版本号紧密相关。另外，所有的软件都把程序文件的包拷贝到/usr/local/src目录中再解压缩，这是习惯。因为在linux中习惯于把后来的软件装在/usr/local中。 (1)安装DNS服务器 1、从www.isc.org下载bind 域名服务器软件。我们这里用的是bind8.3.0，bind8分支和bind9分支是并行发展的。根据自己的实际情况选择合适的bind版本。 2、mkdir /usr/src/bind83 3、下载的文件叫bind-src.tar.gz，复制到/usr/local/src/bind83目录下。 4、cd /usr/local/src/bind83 5、tar zxvf bind-src.tar.gz 6、cd src 7、make stdlinks 8、make clean 9、make depend 10、make all 11、make install 12、编辑配置文件：/etc/named.conf内容如下，需要更改的部分用黑体标出： /* * This is a worthless, nonrunnable example of a named.conf file that has * every conceivable syntax element in use. We use it to test the parser. * It could also be used as a conceptual template for users of new features. */ /* * C-style comments are OK */ // So are C++-style comments # So are shell-style comments // watch out for ";" -- it's important! options { directory "/var/named"; // use current directory named-xfer "/usr/libexec/named-xfer"; // _PATH_XFER dump-file "named_dump.db"; // _PATH_DUMPFILE pid-file "/var/run/named.pid"; // _PATH_PIDFILE statistics-file "named.stats"; // _PATH_STATS memstatistics-file "named.memstats"; // _PATH_MEMSTATS check-names master fail; check-names slave warn; check-names response ignore; host-statistics no; deallocate-on-exit no; // Painstakingly deallocate all // objects when exiting instead of // letting the OS clean up for us. // Useful a memory leak is suspected. // Final statistics are written to the // memstatistics-file. datasize default; stacksize default; coresize default; files unlimited; recursion yes; fetch-glue yes; fake-iquery no; notify yes; // send NOTIFY messages. You can set // notify on a zone-by-zone // basis in the "zone" statement // see (below) serial-queries 4; // number of parallel SOA queries // we can have outstanding for master // zone change testing purposes auth-nxdomain yes; // always set AA on NXDOMAIN. // don't set this to 'no' unless // you know what you're doing -- older // servers won't like it. multiple-cnames no; // if yes, then a name my have more // than one CNAME RR. This use // is non-standard and is not // recommended, but it is available // because PRevious releases supported // it and it was used by large sites // for load balancing. allow-query { any; }; allow-transfer { any; }; transfers-in 10; // DEFAULT_XFERS_RUNNING, cannot be // set > than MAX_XFERS_RUNNING (20) transfers-per-ns 2; // DEFAULT_XFERS_PER_NS transfers-out 0; // not implemented max-transfer-time-in 120; // MAX_XFER_TIME; the default number // of minutes an inbound zone transfer // may run. May be set on a per-zone // basis. transfer-format one-answer; query-source address * port *; /* * The "forward" option is only meaningful if you've defined * forwarders. "first" gives the normal BIND * forwarding behavior, i.e. ask the forwarders first, and if that * doesn't work then do the full lookup. You can also say * "forward only;" which is what used to be specified with * "slave" or "options forward-only". "only" will never attempt * a full lookup; only the forwarders will be used. */ forward first; forwarders { }; // default is no forwarders topology { localhost; localnets; }; // prefer local nameservers listen-on port 53 { any; }; // listen for queries on port 53 on // any interface on the system // (i.e. all interfaces). The // "port 53" is optional; if you // don't specify a port, port 53 // is assumed. /* * Interval Timers */ cleaning-interval 60; // clean the cache of expired RRs // every 'cleaning-interval' minutes interface-interval 60; // scan for new or deleted interfaces // every 'interface-interval' minutes statistics-interval 60; // log statistics every // 'statistics-interval' minutes maintain-ixfr-base no; // If yes, keep transaction log file for IXFR max-ixfr-log-size 20; // Not implemented, maximum size the // IXFR transaction log file to grow }; /* * Control listeners, for "ndc". Every nameserver needs at least one. */ controls { inet * port 52 allow { any; }; // a bad idea unix "/var/run/ndc" perm 0600 owner 0 group 0; // the default }; zone "rd.xxx.com" in { type master; // what used to be called "primary" file "rd.xxx.com.db"; check-names fail; allow-update { none; }; allow-transfer { any; }; allow-query { any; }; // notify yes; // send NOTIFY messages for this // zone? The global option is used // if "notify" is not specified // here. also-notify { }; // don't notify any nameservers other // than those on the NS list for this // zone }; zone "223.99.211.in-addr.arpa" in { type master; // what used to be called "secondary" file "21.9.22.db"; }; zone "0.0.127.in-addr.arpa" in { type master; file "127.0.0.db"; }; zone "." in { type hint; // used to be specified w/ "cache" file "named.root"; }; logging { /* * All log output goes to one or more "channels"; you can make as * many of them as you want. */ channel syslog_errors { // this channel will send errors or syslog user; // or worse to syslog (user facility) severity error; }; category parser { syslog_errors; // you can log to as many channels default_syslog; // as you want }; category lame-servers { null; }; // don't log these at all channel moderate_debug { severity debug 3; // level 3 debugging to file file "foo"; // foo print-time yes; // timestamp log entries print-category yes; // print category name print-severity yes; // print severity level /* * Note that debugging must have been turned on either * on the command line or with a signal to get debugging * output (non-debugging output will still be written to * this channel). */ }; /* * If you don't want to see "zone XXXX loaded" messages but do * want to see any problems, you could do the following. */ channel no_info_messages { syslog; severity notice; }; category load { no_info_messages; }; /* * You can also define category "default"; it gets used when no * "category" statement has been given for a category. */ category default { default_syslog; moderate_debug; };};13、在/var/named/中生成/etc/named.conf中标记的文件：rd.xxx.com.db，内容如下，需要修改和调整相应部分： ;Authoriative data for rd.xxx.com ; $TTL 3600 @ IN SOA compaq.rd.xxx.com. tandongyu.rd.xxx.com. ( 20020101 ;Serial 3600 ;Refresh 1 hour 900 ;Retry 15 mins 604800 ;Expire 7 days 86400) ;Mini 24 hours ;Name server NS records @ IN NS compaq.rd.xxx.com. ;Mail Exchange (MX) records rd.xxx.com. IN MX 0 compaq ;Address (A) records. localhost IN A 127.0.0.1 compaq IN A 21.9.22.9 tls65 IN A 21.9.22.8 fbsd IN A 21.9.22.7 14、在/var/named/中生成/etc/named.conf中标记的文件：21.9.22.db，内容如下，你需要修改相应部分： ; ; $TTL 3600 @ IN SOA compaq.rd.xxx.com. tandongyu.rd.xxx.com. ( 20020101 ;Serial 3600 ;Refresh 900 ;Retry 15 mins 604800 ;Expire 7 days 86400) ;Mini 24 hours ;NameServer (NS) records @ IN NS compaq.rd.xxx.com. ;Address Point to Name (PTR) records 9 IN PTR compaq.rd.xxx.com. 8 IN PTR tls65.rd.xxx.com. 7 IN PTR fbsd.rd.xxx.com. 15、在/var/named/中生成/etc/named.conf中标记的文件：127.0.0.db，内容如下，你需要修改相应部分： ; 0.0.127.in-addr.arpa $TTL 3600 @ IN SOA compaq.rd.xxx.com. tandongyu.rd.xxx.com. ( 20020101;serial 3600 ;refresh 1800 ;retry 604800 ;expiration 3600 ) ;minimum IN NS compaq.rd.xxx.com. 1 IN PTR localhost. 16、在/var/named/中生成/etc/named.conf中标记的文件：named.root，内容大致如下。该文件标记了14个域名服务器。可以从ftp.rs.internic.net获得该文件的最新样本：named.hosts，然后改名成你需要的名字，比如：named.root ; This file holds the information on root name servers needed to ; initialize cache of Internet domain name servers ; (e.g. reference this file in the "cache . 17、我们还需要配置/etc/resolv.conf、/etc/hosts、/etc/hosts.conf文件以适应新的状况。 18、一切都结束后，用/usr/sbin/ndc start命令启动bind,同样的可用stop、restart、reload等命令参数操作。 19、启动后用nslookup命令(有的系统推荐使用dig命令)检验是否正确。如果出现错误，该命令将不能启动。一般的错误都是数据库文件或配置文件笔误所至。比如少个“.”或者文件明不正确等等。 (2) 安装sendmail服务器 1、从www.sendmail.org下载最新的版本(这个snedmail倒是有必要升级为最新的版本，因为它的升级主要是安全漏洞问题)。这里说明的是用的sendmail-8.12.2.tar.gz 2、cd /usr/local/src/ 3、把文件下载到：/usr/local/src中 4、tar zxvf sendmail-8.12.2.tar.gz 5、cd /usr/local/src/sendmail-8.12.2 6、chmod go-w / /etc /etc/mail /usr /var /var/spool /var/spool/mqueue 7、chown root / /etc /etc/mail /usr /var /var/spool /var/spool/mqueue 8、cd /usr/local/src/sendmail-8.12.2/sendmail 9、sh Build 10、cd /usr/local/src/sendmail-8.12.2/cf/cf 11、建立文件sendmail.mc内容如下，你可根据需要修改相应部分。 divert(-1) dnl This is the macro config file used to generate the /etc/sendmail.cf dnl file. If you modify thei file you will have to regenerate the dnl /etc/sendmail.cf by running this macro config through the m4 dnl preprocessor: dnl m4 /etc/sendmail.mc > /etc/sendmail.cf dnl You will need to have the Sendmail-cf pacage installed for this to work. include(`/usr/local/src/sendmail-8.12.2/cf') define(`confDEF_USER_ID',`8:12') OSTYPE(`linux') undefine(`UUCP_RELAY') undefine(`BITNET_RELAY') define(`confTO_CONNECT', `1m') define(`confTRY_NULL_MX_LIST',true) define(`confDONT_PROBE_INTERFACES',true) define(`PROCMAIL_MAILER_PATH',`/usr/bin/procmail') define(`SMART_HOST',compaq.rd.xxx.com) <---这条用于(非HUB)缺省使用HUB发送邮件 MASQUERADE_AS(`rd.xxx.com') <------------------------- FEATURE(`masquerade_entire_domain') <---这三条用于邮件地址伪装 FEATURE(`masquerade_envelope') <------------------------- FEATURE(`smrsh',`/usr/sbin/smrsh') FEATURE(`mailertable',`hash -o /etc/mail/mailertable') FEATURE(`virtusertable',`hash -o /etc/mail/virtusertable') FEATURE(redirect) FEATURE(always_add_domain) FEATURE(use_cw_file) FEATURE(local_procmail) FEATURE(`access_db') FEATURE(`blacklist_recipients') FEATURE(`accept_unresolvable_domains') MAILER(smtp) MAILER(procmail) dnl We strongly recommend to comment this one out if you want to protect dnl yourself from spam. However, the laptop and users on computers that do dnl not hav 24x7 DNS do need this. dnl FEATURE(`relay_based_on_MX') 12、sh Build install-cf 13、groupadd smmsp 14、useradd smmsp 15、cd cd /usr/local/src/sendmail-8.12.2/sendmail 16、sh Build install 17、cd /usr/local/src/sendmail-8.12.2/makemap 18、sh Build clean 19、sh Build all 20、sh Build install 21、cd /usr/local/src/sendmail-8.12.2/ 22、在本域DNS主数据库文件中增加MX纪录： rd.xxx.com. IN MX 0 compaq 注意修改相应部分。那个0是有几个邮件集中器的时候用于标记先后顺序的。当有好几个MX的时候，建议顺序写为10、20、30… 23、在/etc/mail目录下创建access文件，内容类似如下： 127.0.0.1 RELAY 21.9.22 RELAY 211.99.221.238 RELAY 然后：makemap hash access.db < access 24、创建文件/etc/mail/local-host-names，其内容为本机的拥有的域名信息。 rd.xxx.com compaq.rd.xxx.com 25、创建文件/etc/mail/aliases，内容类似： MAILER-DAEMON: postmaster postmaster: root bin: root daemon: root nobody: root 运行newaliases创建数据库。 创建别名文件的意义之一在于当邮件发往域中其他邮件服务器的用户而不是mail HUB用户的时候用。 比如增加一条： atan: atan@fbsd 则导致邮件发往mail HUB的时候自动转发到atan@fbsd.rd.xxx.com 26、启动sendmail： /usr/sbin/sendmail -bd -q30m 排错：如果有问题导致启动不了，大部分问题和DNS配置有关，可以使用nslookup检查DNS是否正常。挨个检查/etc/mail中的文件内容也是排错的好办法。另外，修改配置，不建议直接编辑sendmail.cf文件，建议使用m4宏编译工具，因为有些带有安全漏洞或过时的宏在编译的时候会有提示，这样以免造成相关安全问题。 |
Powered by Discuz! X3.4
Copyright © 2001-2021, Tencent Cloud.
